Welcome

A003 SmartSwitch+Stationay Decoder set

A003 SmartSwitch+Stationay Decoder set
A003 SmartSwitch+Stationay Decoder set
$101.95

Availability: In stock

SmartSwitch is an innovative product for a model railroad.


We use RC servo to control your turnout and layout accessories.


It’s flexible installation and position adjustment.


We believe it will give you more fun on your layout control.




   

Description

Details

1. Easy to install.

2. Built-in drilling template.

3. Dual DC & DCC available:

   a. Dispatch mode (DCC stationary decoder) and

   b. Switch mode. (Toggle switch or Push button switch options).

4. Remote programming technique: Improved user-friendly fully adjustable “hand throttle”.(control board)

5. Adjustable servo speed from slowest 1 to fastest 9. (factory default: middle 5)

6. Adjustable servo horn angles.

7. Dual LED displays in the hand throttle.

8. Improved servo silent technique for analog servos.

9. The virtual center line for easy trouble free mounting.

10. Minimal structural interference---the servo and its mounting linkage are compact in size.

11. More mounting possibilities---traditional, off-center or horizontal rotary installation. The servo can be installed either below the road bed or next to the turnout.

12. Adjustable servo speed and position through the programming features in the SmartSwitchTM control board to give you ultimate control for pressing the point rails against the stock rails.

13. Each control board can control up to four turnouts.

14. Can simultaneously control one or up to four servos by using one toggle switch or push button.

15. Remember the turnout positions when power is off.

16. Provides various settings for indication and signal light.

17. Low current draw. 9V is the minimum requirement for the input power supply.

18. DCC friendly--- the SmartSwitchTM stationary decoder supports a full range of DCC accessory addresses (1-2048) and offers simple mainline address programming.

19. The decoder also supports route control features from major DCC manufacturers.

20. The SmartSwitchTM gives you the ultimate flexibility.

 

 

Dimension 

SmartSwitch control board --110mm x 60mm x 18mm  (4.33” x 2.36” x 0.7”) 

Hand programming board—42mm x 70mm x 19mm (1.65” x 2.75” x 0.748” )

Extension wire 39.37” / 100cm

 

Contents 

1. (1) SmartSwitchTM main control board

2. (1) SmartSwitchTM hand control board

3. (1) Stationary decoder

4. (4) 9g servo

5. (4) Servo bracket 

6. (8) Φ3 x 10mm Wood Screw (For securing servo bracket)

7. (8) Φ2.6 x 15mm Wood Screw (For securing SmartSwitchTM, Stationary decoder)

8. (4) Φ3 x 20mm Pan Head Machine Screw

9. (4) Hex nut

10.(4) Φ0.6 x 100mm(3.9”) control wire

11.(2) 500mm(19.5”) long extension wire

12.(2) 1000mm(39.37”) long extension wire

13.(5) SPST 2 pin toggle switch

14.(8) 5mm plastic spacer (For securing SmartSwitchTM, Stationary decoder)

Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Instagram
Copyright © 2017     國特科技有限公司 ANE MODEL Co., LTD.
10F., No.50, Fuxing Rd., Zhongli Dist., Taoyuan City 32041, Taiwan (R.O.C.) 
32041 台灣桃園市中壢區復興路50號10樓

TEL : 886 3 4270573

Mail:service@anemodel.com